. . "Tensile strength." . . "Degradation." . . "NATIONAL AERONAUTICS AND SPACE ADMINISTRATION CLEVELAND OH LEWIS RESEARCH CENTER." . . "Threshold effects." . . "Solid State Physics." . . "Oxidation." . . "Surfaces." . . "Losses." . . "Temperature." . . "Coatings." . . "Nitrogen." . . "Oxygen." . . "Retention(general)" . . "Mechanics." . . "Argon." . . "Strength(general)" . . "Flexural strength." . . "Environmental tests." . . "Silicon carbides." . . . "Environmental effects on the tensile strength of chemically vapor deposited silicon carbide fibers"@en . . . . . . . . "The room temperature and elevated temperature tensile strengths of commercially available chemically vapor-deposited silicon carbide fibers were measured after 15 min heat treatment to 1600 C in various environments. These environments included oxygen, air, argon and nitrogen at one atmosphere and vacuum at 10 to the minus 9th power atmosphere. Two types of fibers were examined which differed in the SiC content of their carbon-rich coatings. Threshold temperature for fiber strength degradation was observed to be dependent on the as-received fiber-flaw structure, on the environment and on the coating. Fractographic analyses and flexural strength measurements indicate that tensile strength losses were caused by surface degradation. Oxidation of the surface coating is suggested as one possible degradation mechanism. In general, the SiC fibers containing the higher percentage of SiC near the surface of the carbon rich coating showed better strength retention and higher elevated temperature strength. (Author)."@en . . . . . . . . . . . . . . . . . . . . . . . . . "Environmental Effects on the Tensile Strength of Chemically Vapor Deposited Silicon Carbide Fibers"@en . . . . . . . . . . . "Surface finishing." . . "Room temperature." . . "Measurement." . . "Crystallography." . . "Fibers." . . "Fractography." . . "High temperature." . .