Low voltage integrated circuits Congresses Computer-aided design.
Workshop on advances in analog circuit design, AACD (4 : 1995 : Villach, Austria)
Integrated circuits Design and construction Congresses.
Circuits intégrés à faible consommation Conception et construction Informatique.
Digital-to-analog converters Design and construction Congresses.
Radio circuits Design and construction Congresses.
Analogschaltung Kongress Entwurf Lausanne <1996>.
Workshop of advances in analogue circuit design (03 : 1994 : Eindhoven, Pays-Bas)
Workshop of Advances in Analogue Circuit Design (6th : 1997 : Como, Italy)
Workshop of Advances in Analog Circuit Design (5 : 1996 : Lausanne)
Circuits intégrés linéaires Conception et construction Informatique.
Workshop on advances in analog circuits design <1. ; 1995 ; Villach>
Convertisseurs analogique-numérique Conception et construction Informatique.
Integrated circuits Congresses Design and construction.
Amplificateurs haute fréquence Conception et construction Congrès.
Digital-to-analog converters Congresses Design and construction.
Radio circuits Congresses Design and construction.
Modulators (Electronics) Design and construction Congresses.
Circuits radio Conception et construction Congrès.
Analog circuit design : low-noise, low-power, low-voltage, mixed-mode design with CAD tools, voltage, current and time references
Analog circuit design : RF analog-to-digital converters ; sensor and actuator interfaces ; low-noise oscillators, PLLs and synthesizers ; [... the sixth AACD Workshop held in Villa Olmo, April 2-4 1997 Como, Italy]
Analog circuit design. MOST RF circuits, sigma-delta converters, and translinear circuits
Analog circuit design : low-power low-voltage, integrated filters, and smart power
Analog circuit design : MOST RF circuits, sigma-delta converters and translinear circuits
Analog Circuit Design Volt Electronics ; Mixed-Mode Systems ; Low-Noise and RF Power Amplifiers for Telecommunication
Analog circuit design : low-noise, low-power, low-voltage ; mixed-mode design with CAD tools ; voltage, current and time references
MOST RF circuits, sigma-delta converters, and translinear circuits
Analog circuit design : low-noise, low-power, low-voltage ; mixed-mode design with CAD tools ; voltage, current and time references ; [... papers presented at the Workshop on Advances in Analog Circuit Design, which was held in Villach, Austria, 26 - 28 April 1995]
Analog circuit design : Low-noise, low-power, low-voltage : Mixed-mode design with CAD tools : Voltage, current and time references
Analog Circuit Design Volt Electronics; Mixed-Mode Systems; Low-Noise and RF Power Amplifiers for Telecommunication
Analog circuit design. Low-noise, low-power, low-voltage, mixed-mode design with CAD tools, voltage, current and time references
Analog Circuit Design RF Analog-to-Digital Converters; Sensor and Actuator Interfaces; Low-Noise Oscillators, PLLs and Synthesizers
Analog circuit design : RF analog-to-digital converters, sensor and actuator interfaces : low-noise oscillators, PLLs and synthesizers
Electronic books
Analog circuit design : low-power low-voltage integrated filters and smart power
Analog circuit design : MOST RF Circuits, sigma-delta converters and translinear circuits : [proceedings of the fifth AACD workshop held in Lausanne on April 2-4, 1996]
Analog circuit design : low-power low-voltage, integrated filters and smart power
Analog circuit design : RF analog-to-digital converters; sensor and actuator interfaces; low-noise oscillators, PLLs and synthesizers
Analog Circuit Design MOST RF Circuits, Sigma-Delta Converters and Translinear Circuits
Analog circuit design : MOST RF circuits, sigma-delta converters and translinear circuits ; [... contains the revised contributions of all speakers of the Fifth AACD Workshop which was held in Lausanne on April 2 - 4, 1996]
This volume of Analog Circuit Design concentrates on three topics: RF Analog-to-Digital Converters; Sensor and Actuator Interfaces; Low-Noise Oscillators, PLLs and Synthesizers. The book comprises six papers on each topic written by internationally recognised experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I, RF Analog-to-Digital Converters, the application of digital techniques to process analog modulated rf signals in radio receivers requires high linearity and high-resolution analog-to-digital converters. In portable applications these converters must have an extremely low-power consumption to allow a long standby time. In low-cost signal processing applications these converters are combined with a digital signal processing system onto a single chip. Today digital signal processing systems use advanced CMOS technologies requiring the analog-to-digital converter to be implemented in the same (digital) technology. Such an implementation requires special circuit techniques. Furthermore the susceptibility of converters to ground bounce or digital noise is an important design criterion. In this part different converters and conversion techniques are described that are optimized for receiver applications. Part II, Sensor and Actuator Interfaces, interfaces for sensors and actuators shape the gates through which information is acquired from the real world into digital information systems, and vice versa. The interfaces should include analog signal conditioning, analog-to-digital conversion, digital bus interfaces and data-acquisition networks. To simplify the use of data-acquisition systems additional features should be incorporated, like self-test, and calibration. To make these goals economically feasible, these functions should be integrated, preferably with the sensor, on a single chip. This part describes the latest techniques in sensor and actuator interface design. Part III, Low-Noise Oscillators, PLLs and Synthesizers, the phase noise of the receiver's local oscillator limits the immunity against interfering signals. Therefore it has become the most important specification of the local oscillators of all integrated transceivers. Frequency synthesizers for digital tuning in portable radios require extremely low phase noise for the same reason. This part describes designs and architectures which give rise to very low phase noise. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.
This volume of Analog Circuit Design concentrates on three topics: Low-Power Low-Voltage Design; Integrated Filters, and Smart Power. The book comprises six papers on each topic written by internationally recognised experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts: Part I, Low-Power Low-Voltage Design, describes the latest techniques for producing analog circuits with low-voltage low-power requirements. These circuits have an important role to play in the increasing trend towards portable products, where battery life is an important design factor. The papers cover design techniques for amplifiers, analog-to-digital converters, micro-power analog filters and medical devices. Part II, Integrated Filters, presents papers which detail nearly all known techniques to construct integrated filters. These filters all use resistors and capacitors to obtain the filtering function due to the low quality of inductors in silicon. Integration of the filtering function on chips is important to reduce system cost and provide greater accuracy. Part III, Smart Power, illustrates up-to-date techniques for implementing thermal detectors and protection networks to improve reliability and the lifetime of many analog devices. These devices are more specifically those with different analog blocks operating at different temperatures. Smart Power is thus never limited to circuit design only, but must also include packaging and cooling considerations; it is system design. Analog Circuit Design is an essential reference source for analog design engineers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes the book suitable for use in an advanced course.
Analog circuit design : low-noise, low-power, low-voltage; mixed-mode design with CAD tools; voltage, current and time references
Analog Circuit Design RF Analog-to-Digital Converters ; Sensor and Actuator Interfaces ; Low-Noise Oscillators, PLLs and Synthesizers
Analog circuit design : Volt electronics, mixed-mode systems, low-noise and RF power amplifiers for telecommunication; [contributions of 18 tutorial speackers at the Seventh AACD '98 in Copenhagen, April 28-30, 1998]
Analog circuit design : RF analog-to-digital converters, sensor and actuator interfaces, low-noise oscillators, PLLs and synthesizers
Analog Circuit Design Low-Power Low-Voltage, Integrated Filters and Smart Power
This volume of Analog Circuit Design concentrates on three topics: Volt Electronics; Design and Implementation of Mixed-Mode Systems; Low-Noise and RF Power Amplifiers for Telecommunication. The book comprises six papers on each topic written by internationally recognised experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I, Volt Electronics, presents some of the circuit design challenges which are having to be met as the need for more electronics on a chip forces smaller transistor dimensions, and thus lower breakdown voltages. The papers cover techniques for 1-Volt electronics. Part II, Design and Implementation of Mixed-Mode Systems, deals with the various problems that are encountered in mixed analog-digital design. In the future, all integrated circuits are bound to contain both digital and analog sub-blocks. Problems such as substrate bounce and other substrate coupling effects cause deterioration in signal integrity. Both aspects of mixed-signal design have been addressed in this section and it illustrates that careful layout techniques embedded in a hierarchical design methodology can allow us to cope with most of the challenges presented by mixed analog-digital design. Part III, Low-noise and RF Power Amplifiers for Telecommunication, focuses on telecommunications systems. In these systems low-noise amplifiers are front-ends of receiver designs. At the transmitter part a high-performance, high-efficiency power amplifier is a critical design. Examples of both system parts are described in this section. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.
Analog circuit design. Low-power low-voltage, integrated filters, and smart power
This volume of Analog Circuit Design concentrates on three topics: Low-Noise, Low-Power, Low-Voltage; Mixed-Mode Design with CAD Tools; Voltage, Current, and Time References. The book contains six papers on each topic, written by internationally recognised experts. The papers are tutorial in nature and make a substantial contribution to improving the design of analog circuits. The book is divided into three parts. Part I, `Low-Noise, Low-Power, Low-Voltage', concentrates on the problems of the matching properties of high frequency MOS circuits caused by the continuous reduction in the size of integrated devices. These problems are considered in light of maintaining the benefits of greater bandwidth and lower power consumption. Part II, `Mixed Mode Design with CAD Tools', looks at the practicalities of providing CAD tools for circuits containing both digital and analog elements. The papers consider both the simulation and synthesis aspects of designing CAD tools suitable for such designs. Part III, `Voltage, Current and Time References' contains much new and exciting material describing all aspects of these reference circuits. Audience: An essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.
Analog circuit design : low noise, low power, low voltage ; mixed mode design with CAD tools ; voltage, current and time references
Analog circuit design : Low-noise, low-power, low-voltage; mixed-mode design with CAD tools; voltage, current and time reference
Conference papers and proceedings
Analog circuit design : low-noise, low-power, low-voltage; mixed mode design with CAD tools; voltage, current and time references
Analog circuit design : volt electronics, mixed-mode systems, low-noise and RF power amplifiers for telecommunication
Analog circuit design RF analog-to-digital converters, sensor and actuator interfaces : low-noise oscillators, PLLs and synthesizers
This volume of Analog Circuit Design concentrates on three topics: MOST RF Circuits; Bandpass Delta-Sigma Converters; Translinear Circuits. The book comprises six papers on each topic written by internationally recognised experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I, MOST RF Circuits, demonstrates the viability of using CMOS for high-frequency communication applications. This renaissance in radio-frequency design is largely driven by the explosion of interest in telecommunications and several of the papers are specifically targeted to wireless communication applications. Part II, Bandpass Delta-Sigma Converters, describes the latest developments in analog-to-digital and digital-to-analog converters. These converters find applications in telecommunications, hearing aids and audio systems, particularly when they consume low-power and have high performance. This part concludes by looking at the CAD tools required for the design of such converters. Part III, Translinear Circuits, have become important devices in building analog linear functions with variable parameters. This part of the book presents the latest research and techniques for designing Translinear Circuits using both bipolar and CMOS technologies. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.
Analog Circuit Design Low-Noise, Low-Power, Low-Voltage ; Mixed-Mode Design with CAD Tools ; Voltage, Current and Time References
Analog circuit design : volt electronic, mixed-mode systems, low-noise ans RF power amplifiers for telecommunication
Analog circuit design : Low-power low-voltage, integrated filters and smart power : [proceedings of the third AACD workshop, March, 1994, Eindhoven]
Analog circuit design : low-power low-voltage, integrated filters, and smart power ; [contains the revised contributions of all speakers of the third AACD Workshop held in Eindhoven March 1994]
Analog Circuit Design Low-Noise, Low-Power, Low-Voltage; Mixed-Mode Design with CAD Tools; Voltage, Current and Time References
Low voltage integrated circuits Congresses Design and construction.
Circuits intégrés à faible consommation Conception et construction Congrès.
Electric filters Congresses Computer-aided design.
Workshop of Advances in Analogue Circuit Design (5th : 1996 : Lausanne, Switzerland)
Low voltage integrated circuits Design and construction Congresses.
Convertisseurs analogique-numérique Conception et construction Congrès.
Filtres électriques Conception et construction Informatique.
Convertisseurs numérique-analogique Conception et construction Congrès.
Workshop of Advances in Analogue Circuit Design (7 1998.04.28-30 Copenhagen)
Workshop of Advances in Analogue Circuit Design (4th 1995 Villach, Austria)
Workshop of Advances in Analogue Circuit Design (4th : 1995 : Villach, Austria)
Workshop of Advances in Analogue Circuit Design (6 1997.04.02-04 Como, Italy)
Workshop of Advances in Analogue Circuit Design (6 : 1997.04.02-04 : Como, Italy)
Advances in Analog Circuit Design, AACD (3 : 1994 : Eindhoven)
Workshop of Advances in Analogue Circuit Design, AACD (5 1996.04.02-04 Lausanne)
Modulators (Electronics) Congresses Design and construction.
Workshop of Advances in Analogue Circuit Design (6è : 1997 : Como, Itàlia)
Linear integrated circuits Design and construction Congresses.
Electric filters Congresses Design and construction.
Workshop of Advances in Analogue Circuit Design (7th ; 1998)
Circuits intégrés linéaires Conception et construction Congrès.
Analogschaltung Entwurf Kongress Lausanne <1996>
Electric filters Design and construction Congresses.
Workshop of Advances in Analogue Circuit Design (5è : 1996 : Lausana, Suïssa)
Workshop of Advances in Analogue Circuit Design (3r : 1994 : Eindhoven)
Convertisseurs analogique-numérique Conception et construction.
Workshop on Advances in Analog Circuit Design (1995.04.26-28 : Villach)
Workshop on Advances in Analog Circuit Design (1995.04.26-28 Villach)
Circuits intégrés Conception et construction Congrès.
Filtres électriques Conception et construction Congrès.
Metall òxid semiconductors complementaris Congressos.
Analog-to-digital converters Design and construction Congresses.
Amplifiers, Radio frequency Design and construction Congresses.
AACD Workshop (6th : 1997 : Como, Italy)
Linear integrated circuits Congresses Design and construction.
Circuits intégrés linéaires Conception et construction.
Workshop of Advances in Analogue Circuit Design (7th : 1998 Copenhagen, Denmark)
Workshop of Advances in Analogue Circuit Design (7th : 1998 : Copenhagen, Denmark)
Circuits integrats digitals Disseny i construcció
Circuiti integrati - Progettazione e costruzione.
Linear integrated circuits Congresses Computer-aided design.
Workshop of Advances in Analogue Circuit Design (3rd : 1994 : Eindhoven, Netherlands)
AACD Workshop. <7, 1998, København>.
Workshop of Advances in Analog Circuit Design.
Workshop of Advances in Analog Circuit Design (3 : 1994 : Eindhoven, Netherlands)
Workshop of advances in analogue circuit design <7. ; 1998 ; Copenhagen>
Amplifiers, Radio frequency Congresses Design and construction.
Analog-to-digital converters Congresses Design and construction.
Analog-to-digital converters Congresses Computer-aided design.